Wash the post-filter ID: v8-post-filter Version: 2.0.0 Model: Dyson V8 SV10 · pinch filter · US Region: US Parts: Pinch-handle Filter A and twist-off Filter B; original dry motorized head Not covered: V8 star pre-filter; V8 Cyclone; Soft roller / Fluffy head cleaning; V10 / V11; Modified batteries or aftermarket heads MATCH YOUR VERSION Top filter: SV10 with the pinch-handle Filter A The V8 name alone does not identify the filter. Compare the label and the official star/pinch selector. Floor head: Original dry motorized head shown in manual 229602-01 This collection covers the original dry head. A washable roller does not make a motorized head washable. Regional instructions: My SV10 label and US manual 229602-01 match Use your supplied regional manual if it differs; do not infer compatibility from a similar name. PREPARE [ ] Read SV10 on the label, confirm the US 229602-01 manual and match the pinch-handle Filter A, twist-off Filter B and any head involved. [ ] Disconnect the charger, release the trigger and let the machine cool before handling removable parts. Keep your hand away from the trigger. [ ] Tool: Sink [ ] Tool: Upright drying space away from heat [ ] Material: Cold water STOP Stop for a damaged charger, burning smell, liquid exposure, a swollen or leaking battery, broken catches or an obstruction you cannot safely reach. Contact Dyson and keep the battery sealed. CONSUMABLE FIT Cold water: Water only; rinse the inside pleats of Filter B. Fit: Original SV10 twist-off rear Filter B Do not substitute: Detergent, fragrance, heat-assisted drying and a different rear-filter design Source: dyson-v8-manual, p12 Washing Filter B; p9 Wash filters CHECK ROUTE safety: Is the charger disconnected, the machine cool and undamaged, and your hand away from the trigger? Yes -> check-1: Continue with the matching parts and the checks below. No -> service: Stop for a damaged charger, burning smell, liquid exposure, a swollen or leaking battery, broken catches or an obstruction you cannot safely reach. Contact Dyson and keep the battery sealed. Not sure -> prepared: Save your observations and compare the matching manual before continuing. check-1: Does the rear Filter B turn counter-clockwise to the open position shown in this manual? Yes -> check-2: Use the rear filter’s inside-pleat method. No -> prepared: Match the exact filter before trying to remove it. Not sure -> prepared: Save your observations and compare the matching manual before continuing. check-2: Can the filter stand upright and dry fully for at least 24 hours? Yes -> steps: Keep both filters out of use until fully dry. No -> prepared: Arrange the drying space and downtime before washing. Not sure -> prepared: Save your observations and compare the matching manual before continuing. CARE STEPS (only when the route reaches steps) [ ] 1. Unlock the rear filter Turn Filter B counter-clockwise to the open position and pull it away from the rear of the machine. Keep the electrical body well away from water. Look for: The rear filter separates at its normal lock; no casing screws are involved. Source: dyson-v8-manual, p12 Washing Filter B; p9 Wash filters [ ] 2. Wash the inside pleats Run cold water through the inside of Filter B, rotating the filter so every pleat is rinsed. Use water only. Look for: The exact SV10 manual specifies inside washing for Filter B. Source: dyson-v8-manual, p12 Washing Filter B; p9 Wash filters [ ] 3. Tap and repeat Tap the filter gently against the side of the sink to release debris. Repeat the rinse-and-tap process 4–5 times until it is clean. Look for: Remaining debris calls for another gentle rinse; keep the pleats intact. Source: dyson-v8-manual, p12 Washing Filter B; p9 Wash filters [ ] 4. Stand upright to dry Stand Filter B upright with the top facing up and record the drying start. Air-dry completely for at least 24 hours, away from heat appliances and flame. Look for: The filter stays upright and outside the machine. Source: dyson-v8-manual, p12 Washing Filter B; p9 Wash filters [ ] 5. Check every pleat is dry Once at least 24 hours have passed, check that the filter is completely dry. If moisture remains, continue air-drying and leave the confirmation unchecked. Look for: Time alone does not permit a damp filter to be refitted. Source: dyson-v8-manual, p12 Washing Filter B; p9 Wash filters [ ] 6. Return to the locked position Return the fully dry Filter B to the open position on the machine and turn clockwise until it clicks into place. Check it is secure without forcing it. Look for: The rear filter locks normally and has no visible damage. Source: dyson-v8-manual, p12 Washing Filter B; p9 Wash filters [ ] 7. Check Filter A before use Confirm that Filter A is also completely dry and correctly seated, and that the bin is fitted. Keep the machine stopped until the whole machine is ready; this task records Filter B care only. Look for: A separately washed Filter A needs its own complete drying interval. Source: dyson-v8-manual, p11 Vacuuming; Washing the filters; p12 Looking for blockages DRYING GATE At least 24 hours must pass AND the filter must be completely dry. Time alone does not authorize refitting. OBSERVATIONS Rear filter checked (required): ____________________ Choices: Matching twist-off Filter B Filter B drying started (required): ____________________ Filter B is completely dry after the minimum drying interval (required): ____________________ Filter B clicked into its normal locked position (required): ____________________ RESULT CHECKS [ ] The inside pleats are clean and Filter B has dried upright for at least 24 hours and completely. [ ] The rear lock is secure, and both filters and the bin are ready before use. NEXT CARE Regular filter care; check sooner after fine dust or intensive use. Wash both filters at least once a month; more frequent washing may be needed with fine dust, intensive use or mainly Powerful suction mode. Basis: manufacturer Source: dyson-v8-manual, p11 Washing the filters Record preparation, maintenance readiness, problem located or service needed. This is not proof of a physical repair. SOURCES Dyson V8 SV10 operating manual, pinch filter (229602-01) https://www.dyson.com/content/dam/dyson/maintenance/user-guides/en_US/vacuumcleaners/cordlessstickvacuums/sv10/without-soft-roller/229602-01.pdf p12 Washing Filter B; p9 Wash filters Checked: 2026-10-13 Manufacturer copyright. Facts paraphrased; manual and diagrams not redistributed. Choose your Dyson V8 support: star or pinch filter https://www.dyson.com/support/vacuum-cleaners/cordless/v8 V8 support selector: pinch handle versus star filter Checked: 2026-10-13 Linked only; original identification explanation.