V8 filter wash & return to use
ID: v8-filter-reset
Version: 2.0.0
Keep the two filters separate from washing through a recorded dry refit.

OUTCOME
A dated filter record and a clear decision to refit or keep waiting.
Round result: Not recorded

MODEL
Dyson V8 SV10 · pinch filter · US
US
Pinch-handle Filter A and twist-off Filter B; original dry motorized head
Not covered: V8 star pre-filter; V8 Cyclone; Soft roller / Fluffy head cleaning; V10 / V11; Modified batteries or aftermarket heads

PREPARE
[ ] Cold water only
[ ] Two clean, ventilated drying positions
[ ] The exact SV10 pinch-filter manual

TASK ORDER
1. Wash the pre-filter
Wash the pinch-handle Filter A using its own method.
Task v8-pre-filter / 2.0.0
https://csl-14-small-repair.pages.dev/tasks/v8-pre-filter/
Recorded result: Not recorded

2. Wash the post-filter
Wash Filter B using the inside-pleat method.
Task v8-post-filter / 2.0.0
https://csl-14-small-repair.pages.dev/tasks/v8-post-filter/
Recorded result: Not recorded

3. Verify the vacuum after care
Review assembly. If either filter was washed in this session, retain the timed filter-task records and save preparation here; this task does not replace either drying gate.
Task v8-after-care / 2.0.0
https://csl-14-small-repair.pages.dev/tasks/v8-after-care/
Recorded result: Not recorded

TASK OBSERVATIONS
Wash the pre-filter
Result: Not recorded
Service needed: Not recorded
Steps recorded: 0 / 7
Revision: 0
Route: 
Top filter checked: Not recorded
Filter A drying started: Not recorded
Filter A is completely dry after the minimum drying interval: Not confirmed
Filter B before using the vacuum: Not recorded

Wash the post-filter
Result: Not recorded
Service needed: Not recorded
Steps recorded: 0 / 7
Revision: 0
Route: 
Rear filter checked: Not recorded
Filter B drying started: Not recorded
Filter B is completely dry after the minimum drying interval: Not confirmed
Filter B clicked into its normal locked position: Not confirmed

Verify the vacuum after care
Result: Not recorded
Service needed: Not recorded
Steps recorded: 0 / 7
Revision: 0
Route: 
Bin, airway or brush care completed before this check: Not recorded
Filter condition during this maintenance session: Not recorded
Both filters are fully dry and correctly seated/locked: Not confirmed
Bin, wand, head and any removed fastener are secure: Not confirmed
Observed result: Not recorded

SEASON & REMINDER
Any season: choose a day when the vacuum can remain unused while both filters dry.
Use the exact manual’s cleaning frequency, adjusted when the manual calls for more frequent care. A calendar reminder never shortens drying.
Reminder: Choose your own date
User-selected reminder; task-specific manufacturer triggers remain authoritative

CONSUMABLE FIT
Cold water: Water only; rinse the outside of Filter A.
Fit: Original SV10 pinch-handle Filter A
Exclude: Detergent, fragrance and heat-assisted drying; star filter instructions

Cold water: Water only; rinse the inside pleats of Filter B.
Fit: Original SV10 twist-off rear Filter B
Exclude: Detergent, fragrance, heat-assisted drying and a different rear-filter design

Dry cloth: Wipe accessible exterior surfaces without applying cleaning agents.
Fit: Dry exterior of this SV10 and detached accessory surfaces
Exclude: Lubricant, polish, air freshener and liquid on electrical parts

Task records describe observations, not a physical repair certification.

SOURCES
Dyson V8 SV10 operating manual, pinch filter (229602-01)
https://www.dyson.com/content/dam/dyson/maintenance/user-guides/en_US/vacuumcleaners/cordlessstickvacuums/sv10/without-soft-roller/229602-01.pdf
p11 Washing the filters; Washing Filter A; p9 Wash filters; p12 Washing Filter B; p9 Wash filters; p11 Vacuuming; Washing the filters; p12 Looking for blockages

Choose your Dyson V8 support: star or pinch filter
https://www.dyson.com/support/vacuum-cleaners/cordless/v8
V8 support selector: pinch handle versus star filter