Clear a visible body-inlet blockage ID: v8-body-blockage Version: 2.0.0 Model: Dyson V8 SV10 · pinch filter · US Region: US Parts: Pinch-handle Filter A and twist-off Filter B; original dry motorized head Not covered: V8 star pre-filter; V8 Cyclone; Soft roller / Fluffy head cleaning; V10 / V11; Modified batteries or aftermarket heads MATCH YOUR VERSION Top filter: SV10 with the pinch-handle Filter A The V8 name alone does not identify the filter. Compare the label and the official star/pinch selector. Floor head: Original dry motorized head shown in manual 229602-01 This collection covers the original dry head. A washable roller does not make a motorized head washable. Regional instructions: My SV10 label and US manual 229602-01 match Use your supplied regional manual if it differs; do not infer compatibility from a similar name. PREPARE [ ] Read SV10 on the label, confirm the US 229602-01 manual and match the pinch-handle Filter A, twist-off Filter B and any head involved. [ ] Disconnect the charger, release the trigger and let the machine cool before handling removable parts. Keep your hand away from the trigger. [ ] Tool: Good lighting [ ] Material: Waste bag STOP Stop for a damaged charger, burning smell, liquid exposure, a swollen or leaking battery, broken catches or an obstruction you cannot safely reach. Contact Dyson and keep the battery sealed. CONSUMABLE FIT Dustproof bag: Contain dry bin contents; close the bag after emptying. Fit: Original clear bin during emptying Do not substitute: Liquid, hot ash and hazardous material Source: dyson-v8-manual, p11 Emptying the clear bin; Cleaning the clear bin CHECK ROUTE safety: Is the charger disconnected, the machine cool and undamaged, and your hand away from the trigger? Yes -> check-1: Continue with the matching parts and the checks below. No -> service: Stop for a damaged charger, burning smell, liquid exposure, a swollen or leaking battery, broken catches or an obstruction you cannot safely reach. Contact Dyson and keep the battery sealed. Not sure -> prepared: Save your observations and compare the matching manual before continuing. check-1: Have you checked the detached wand/head, and can you identify the manual’s cyclone and bin releases? Yes -> check-2: Follow the documented user-removable route to the inlet. No -> prepared: Inspect the external path and compare the bin-release illustration first. Not sure -> prepared: Save your observations and compare the matching manual before continuing. check-2: Is the suspected obstruction dry, non-sharp and reachable through the documented opening? Yes -> steps: Remove only accessible material after the cyclone and bin are detached. No -> service: A sharp or inaccessible obstruction needs Dyson support. Not sure -> prepared: Save your observations and compare the matching manual before continuing. CARE STEPS (only when the route reaches steps) [ ] 1. Empty and open the bin Disconnect the charger and keep the trigger released. Remove the wand/tool, safely empty the bin and leave its base open using the red lever. Look for: The bin is empty before access to its inlet is opened. Source: dyson-v8-manual, p11 Emptying the clear bin; Cleaning the clear bin [ ] 2. Remove the cyclone by its release Press the red button behind the raised cyclone and lift the cyclone out. Keep the assembly dry and set it aside. Look for: The identified user release moves normally without force. Source: dyson-v8-manual, p11 Emptying the clear bin; Cleaning the clear bin [ ] 3. Slide the clear bin off Pull back the red catch at the bin base, slide the bin down and bring it carefully forward from the body. Look for: This exposes the user-accessible inlet area; the motor and battery casings stay closed. Source: dyson-v8-manual, p11 Emptying the clear bin; Cleaning the clear bin [ ] 4. Locate and remove reachable debris Inspect the exposed inlet area with good lighting and compare the Stubborn blockages illustration. Carefully remove the visible dry obstruction, watching for sharp objects. If it cannot be reached safely, stop. Look for: Record the location and material actually found; do not probe hidden internal passages. Source: dyson-v8-manual, p12 Looking for blockages; Blockages – automatic cut-out; p8 Stubborn blockages [ ] 5. Recheck the opening Check that the visible inlet is clear and that no catch or plastic part is damaged. Keep all parts dry. Look for: An unresolved restriction or broken catch requires support before reassembly for use. Source: dyson-v8-manual, p12 Looking for blockages; Blockages – automatic cut-out; p8 Stubborn blockages [ ] 6. Restore the bin first Align bin tabs with body grooves and slide the bin upward until the catch clicks. If the bin needed wiping, finish the separate bin-clean task and complete drying first. Look for: The bin catch holds normally. Source: dyson-v8-manual, p11 Emptying the clear bin; Cleaning the clear bin [ ] 7. Restore the cyclone and base Slide the cyclone into its grooves, push it down to normal position and close the bin base until it clicks. Fit the wand/head, bin and both dry filters securely before any normal-use check. Look for: Use the after-care task and stop if the symptom recurs. Source: dyson-v8-manual, p11 Emptying the clear bin; Cleaning the clear bin OBSERVATIONS Cyclone and bin releases matched the manual (required): ____________________ Visible inlet location and material removed (required): ____________________ Visible inlet is clear and catches are intact (required): ____________________ Bin, cyclone, base and attachments are securely restored (required): ____________________ RESULT CHECKS [ ] The observed body-inlet restriction is removed through the documented bin opening. [ ] Every removed part is dry and secure; persistent trouble is referred to Dyson. NEXT CARE The wand and head are clear but a dry restriction is visible at the bin/body inlet. As needed for this condition. No fixed calendar interval is specified for this check; choose your own review date if useful. Basis: user-plan Source: dyson-v8-manual, p12 Looking for blockages; Blockages – automatic cut-out; p8 Stubborn blockages Record preparation, maintenance readiness, problem located or service needed. This is not proof of a physical repair. SOURCES Dyson V8 SV10 operating manual, pinch filter (229602-01) https://www.dyson.com/content/dam/dyson/maintenance/user-guides/en_US/vacuumcleaners/cordlessstickvacuums/sv10/without-soft-roller/229602-01.pdf p12 Looking for blockages; Blockages – automatic cut-out; p8 Stubborn blockages; p11 Emptying the clear bin; Cleaning the clear bin Checked: 2026-10-13 Manufacturer copyright. Facts paraphrased; manual and diagrams not redistributed. Choose your Dyson V8 support: star or pinch filter https://www.dyson.com/support/vacuum-cleaners/cordless/v8 V8 support selector: pinch handle versus star filter Checked: 2026-10-13 Linked only; original identification explanation.