Cool the EC685 coffee circuit after steam ID: ec685-cool-after-steam Version: 2.0.0 Model: Dedica EC685 · without EX:4 · International manual Region: English International manual 57132C8997_01_0626; regional nameplate must match Parts: Three buttons, steam dial, removable frother and tabbed perforated filter as pictured in this manual Only EC685 without EX:4. Section 7.3 does not assign this cooling procedure to EC685 EX:4. Not covered: EC680; Dedica Arte EC885; Maestro EC950; Modified steam wand; Different filter design; Regional instructions that differ from this manual; EC685 EX:4 / EC685 EX4 cooling sequence MATCH YOUR VERSION Manual and region: EC685 / EX:4: English International 57132C8997_01_0626 matches my appliance The US support-domain link serves an English International manual. It does not establish US electrical compatibility. Controls and removable parts: Original three buttons, steam dial, removable frother and tabbed filter insert Compare the removable parts and control illustrations before following a cleaning sequence. PREPARE [ ] Confirm the nameplate and your regional manual before connecting the appliance. The English International download on a US support page does not establish US electrical compatibility. [ ] For handling or external cleaning: stop delivery, switch off, unplug and wait until the appliance and removable parts are cool. Follow the separate powered steps only after reassembly. [ ] Identify EC685 without EX:4 on the nameplate while the machine is cool and unplugged, before normal milk use. Do not tilt a hot or water-filled machine to read its underside. [ ] This task uses normal controls with the frother fully assembled; allow hot water and steam to discharge into the container without touching or removing parts. [ ] Tool: Heat-resistant collection container [ ] Material: Fresh clean water in the tank STOP Stop for a damaged cord, burning smell, liquid leaking from the appliance body, all lights flashing while the machine does not work, or a holder that remains hot or pressurized. Disconnect when safe and contact De’Longhi Customer Services. Keep the casing, boiler and internal steam circuit closed. CONSUMABLE FIT Fresh clean water: Fill the tank no higher than MAX. Fit: EC685 / EC685 EX:4 matching this manual. Do not substitute: Do not operate with an empty tank or with the tank removed. Source: dedica-manual, p6 §2 CHECK ROUTE safety: Is the appliance undamaged, with delivery stopped and parts cool and unplugged for any hands-on work? Yes -> manual-match: Keep hands clear of outlets during the specific powered water or steam steps below. No -> service: Stop for a damaged cord, burning smell, liquid leaking from the appliance body, all lights flashing while the machine does not work, or a holder that remains hot or pressurized. Disconnect when safe and contact De’Longhi Customer Services. Keep the casing, boiler and internal steam circuit closed. Not sure -> prepared: Save a preparation record and compare the matching manual before continuing. manual-match: Does your EC685 or EC685 EX:4 match English International manual 57132C8997_01_0626, including the three buttons, original frother and tabbed filter? Yes -> check-1: Continue only with the controls and parts pictured in this manual. No -> prepared: Find the manual supplied for your region and component version. This guide cannot confirm a different version. Not sure -> prepared: Save a preparation record and compare the matching manual before continuing. check-1: Does your confirmed nameplate say EC685 without EX:4, matching the model scope of §7.3? Yes -> check-2: Continue only for this base EC685 cooling instruction. No -> prepared: EC685 EX:4 is excluded from this task. Use its matching regional instructions or Customer Services. Not sure -> prepared: Save a preparation record and compare the matching manual before continuing. check-2: After steam use and exit from steam mode, do both coffee-button lights flash together as in §7.3? Yes -> steps: Use the cooling cycle with a container beneath the frother. No -> prepared: Identify the current indication in §13; do not run this cycle for unrelated flashing or all lights flashing. Not sure -> prepared: Save a preparation record and compare the matching manual before continuing. CARE STEPS (only when the route reaches steps) [ ] 1. Record the exact version and indication Use the nameplate identification already made while the appliance was cool. Confirm EC685 without EX:4 and record that both coffee-button lights are flashing after steam use. Leave the hot frother and holder attached. Look for: The version and trigger both match §7.3 before any control is changed. Source: dedica-manual, p8 §7.3; p6 §1 [ ] 2. Prepare the water and collection path Check there is water in the tank and put a stable heat-resistant container under the fully assembled frother. Keep hands and face away from the dispenser. Look for: The container will collect both steam and hot water without holding it under the outlet. Source: dedica-manual, p8 §7.3 first point; p6 §2 [ ] 3. Open the steam dial for cooling Open the dial to the steam/hot-water position. Allow steam and hot water to discharge into the container. The one-cup light flashes during this cooling delivery. Look for: The expected discharge and one-cup indication are observed; do not remove the frother or holder. Source: dedica-manual, p8 §7.3 second point [ ] 4. Wait for the documented end state Wait until discharge stops automatically and the one-cup and two-cup lights flash, as §7.3 describes for completion of cooling. If delivery or indications do not match, close the dial and seek manual or service guidance instead of repeatedly restarting. Look for: Automatic stop and the two coffee-light indication occur together. Source: dedica-manual, p8 §7.3 third point [ ] 5. Close the dial Turn the steam dial back to ○. Confirm coffee readiness before the next normal coffee. Move the collection container only after discharge has stopped and it can be handled safely. Look for: The dial is closed and the cooling sequence is complete. Source: dedica-manual, p8 §7.3 third point; p12 §13 [ ] 6. Keep milk cleaning separate Complete the after-milk frother-cleaning task once it is safe to purge, switch off and cool the removable parts. If the coffee lights still will not show readiness, save the remaining indication for support. Look for: Cooling the circuit and cleaning milk residue are both addressed by their specific instructions. Source: dedica-manual, p8 §§7.2–7.3 OBSERVATIONS Nameplate confirmed EC685 without EX:4 (required): ____________________ Both coffee-button lights flashed together after steam use (required): ____________________ Cooling discharge and flashing one-cup light observed (required): ____________________ Automatic stop with the two coffee lights flashing observed (required): ____________________ Steam dial returned to ○ after cooling (required): ____________________ RESULT CHECKS [ ] The base EC685 version and after-steam trigger are recorded. [ ] Cooling reached automatic stop, the dial is closed and the next readiness indication is checked. NEXT CARE On the base EC685, both coffee lights flash together after steam and the circuit needs cooling. Perform the §7.3 cooling cycle only for its stated version and indication; no calendar interval is specified. Basis: manufacturer Source: dedica-manual, p8 §7.3 Record preparation, maintenance readiness, problem located or service needed. This is not proof of a physical repair. SOURCES De’Longhi EC685 / EC685 EX:4 instructions (57132C8997_01_0626) https://library.delonghigroup.com/assetbank-delonghi/action/directLinkImage?assetId=296204&download=true p8 §7.3: only EC685, EC695, EC785; p8 §7 exit-steam note; p12 §13 Checked: 2026-10-13 Manufacturer copyright. Original workflow based on manual facts; PDF not redistributed. Dedica Style EC685.TB EX:4 support center https://www.delonghi.com/en-us/s/EC685.TB%20EX%3A4 EC685.TB EX:4 → English (International) → Instructions for use, 57132C8997_01_0626 Checked: 2026-10-13 Linked only.